Useful Features Operating With The Remote Control; Break Timer; Displaying The Pointer; Using The Spot Function - Sharp Notevision PG-D45X3D Operation Manual

Operating with the Remote Control
1 1
Press
• The timer starts to count down from 5
minutes.
On-screen display
Press P/R/O/Q to adjust the
2 2
length of the break time.
Increases with P or Q
•
5 minutes ➞ 6 minutes ➞ 60 minutes
Shortens with O or R
•
4 minutes ➞ 3 minutes ➞1 minute
• The break time can be set in units of one
minute (up to 60 minutes).
Canceling the break timer display function
Press
Note
• The Break Timer is not available while the
projector is operating the following functions.
- Auto Sync
- Freeze
- AV Mute
32
BREAK TIMER button
FREEZE button
MAGNIFY buttons
POINTER button
SPOT button
Adjustment buttons
(P/R/O/Q)
EFFECT button
PICTURE MODE button
ECO+QUIET button
AUTO SYNC button
.
.
1 1
Press
O/Q on the remote control to
move the pointer.
• Press EFFECT to change the pointer icon
(5 types).
Star Finger1
2 2
Press
• The pointer will disappear.
1 1
Press
on the remote control to move
the spot area.
• Press EFFECT to change the spot area
size (3 types).
1/9 1/25
2 2
Press
• The spot area will disappear.
Press
Eco+Quiet mode between on and off.
• When the Eco+Quiet mode is set to "ON", the
sound of the cooling fan will turn down, the power
consumption will decrease, and the lamp life will
extend.
Note
• Refer to "Eco+Quiet" on page
and press P/R/
Finger2 Heart Underline
again.
and press P/R/O/Q
1/8
again.
to switch the
42 for details.