Projection (Prj) Mode; Ceiling-Mount Setup - Sharp XV-Z21000 Operation Manual

Projection (PRJ) Mode

The projector can use any of the 4 projection modes, shown in the diagram below. Select the mode most ap-
propriate for the projection setting in use. (You can set the PRJ Mode in "Options" menu. See page 45.)
■ Table mounted, front projection
■ Table mounted, rear projection
(with a translucent screen)

Ceiling-mount Setup

■ It is recommended that you use the optional Sharp ceiling-mount bracket for this installation. Before mounting
the projector, contact your nearest Sharp Authorized Service Center or Dealer to obtain the recommended
ceiling-mount bracket (sold separately).
• AN-NV6T ceiling-mount bracket, its AN-TK201 and AN-TK202 extension tubes.
■ Invert the image by setting "Ceiling + Front" in "PRJ Mode". See page 45 for use of this function.
Indication of the Projection Image Size and Projection Distance
For details, refer to "Picture (Screen) Size and Projection Distance" on page 16.
Example : When using a wide screen (16:9)
Downloaded From projector-manual.com Sharp Manuals
Menu item ➞ "Front"
Menu item ➞ "Rear"
Picture Size
300"
200"
100"
80"
60"
■ Ceiling mounted, front projection
Menu item ➞ "Ceiling + Front"
■ Ceiling mounted, rear projection
(with a translucent screen)
Menu item ➞ "Ceiling + Rear"
Projection
Distance
-15