Auto Sync (Auto Sync Adjustment); Freezing A Moving Image; Selecting The Picture Mode; Displaying An Enlarged Portion Of An Image - Sharp Notevision PG-D45X3D Operation Manual

Auto Sync function works when detecting
input signal after the projector turns on.
Press
with Auto Sync function.
Note
• When the optimum image cannot be achieved
with Auto Sync adjustment, use the help
menu for manual adjustments. (See page 51.)
1 1
Press
• The projected image is frozen.
2 2
Press
the moving image from the
currently connected device.
You can select the appropriate Picture
mode for the projected image, such as
movie or video game.
Press
• When pressing PICTURE MODE, the Picture
mode changes in the following order:
STANDARD PRESENTATION
Note
• See page 40 for details on the Picture mode.
* "sRGB" is displayed only when RGB signal is input.
to manually adjust
.
again to return to
.
*
MOVIE GAME sRGB
Graphs, tables and other portions of
projected images can be enlarged. This
is helpful when providing more detailed
explanations.
1 1
Press
remote control.
• Enlarges the image.
• Pressing or
or reduces the projected image.
Note
.
Press
×1 ×2 ×3 ×4
.
Press
• You can change the location of the
enlarged image using P, R, O and Q.
2 2
Press
control to cancel the operation.
The magnifi cation then returns to u1.
•
Note
• The selectable magnifi cations differ
depending on the input signal.
• In the following cases, the image will
return to the normal size (u1).
- When switching the Input mode.
- When RETURN has been pressed.
- When the input signal is changed.
- When the input signal resolution and
refresh rate (vertical frequency)
change.
- When the Resize mode is changed.
- When the Picture mode is changed.
- When the Progressive mode is
changed.
on the
MAGNIFY enlarges
on the remote
33