Connecting To Component Video Equipment - Sharp Notevision PG-B10S Operation Manual

Connecting to Component
Video Equipment
Use a 3 RCA to 15-pin D-sub cable when con-
necting to the INPUT 1 terminal, component
video equipment such as DVD players and
DTV* decoders.
*
DTV is the umbrella term used to describe the
new digital television system in the United
States.
1
Connect the projector to the
video equipment using the 3
RCA to 15-pin D-sub cable.
Secure the connectors by tightening the
thumbscrews.
2
Connect the projector to the
video equipment using a ø3.5
mm minijack to RCA audio cable
(commercially available).
Note
If the projector does not automatically de-
tect a COMPONENT signal, the projected
image will appear distorted. To correct,
change the menu setting from "Auto" to
"Component". The menu setting can be
found in the "Picture" menu. See page 38.
A ø3.5 mm minijack to RCA audio cable
(commercially available) is required for au-
dio input.
3RCA to 15-pin D-sub cable
Optional
AN-C3CP
cable
(9'10" (3.0 m))
To analog component output terminal
To audio output terminal
DVD player or
*
DTV decoder
1
3 RCA to 15-pin D-sub cable
(sold separately)
2
ø3.5 mm minijack to RCA audio cable
(commercially available)
-53