Setup And Projection - Sharp Notevision PG-B10S Operation Manual

Setup and Projection

In this section, connection of the projector and the computer is explained as an example.
1.
Place the projector facing a wall or a screen
2.
Connect the projector to the computer and plug the power
cord into the AC socket of the projector
When connecting equipment other than the computer, see pages
3.
Turn the projector on
-16
3 ON button
5 INPUT button
4 KEYSTONE button
4 Adjustment buttons
('"\ |)
4 Zoom knob
4 Focus ring
4 Lens shift lever
4 HEIGHT ADJUST button
On the projector
3 ON button
4 KEYSTONE button
4 Adjustment buttons
('"\ |)
5 INPUT 1 button
13 and 50.
On the remote control
Page 56
Pages 51, 55
Page 18