Connecting To A Monitor; Connecting The Power Cord To The Projector - Sharp Notevision PG-B10S Operation Manual

Connecting to a Monitor

Watching Images on
Both the Projector and a
Monitor
You can display computer images on both the
projector and a separate monitor using RGB
cables.
1
Connect the projector to the
computer using the supplied
RGB cable.
Secure the connectors by tightening the
thumbscrews.
2
Connect the projector to the
monitor using the computer
RGB cable (sold separately).
Secure the connectors by tightening the
thumbscrews.
Note
Analog RGB signals as well as Component
signals can be output to the monitor.
For this connection, computer RGB cable
(sold separately) is required.

Connecting the Power Cord to the Projector

Connecting the Power
Cord
Plug the supplied power cord into the
AC socket on the rear of the projector.
Supplied
accessory
Computer RGB cable
Optional
AN-C10BM
cable
(32'10" (10.0 m))
To RGB input port
RGB cable
Supplied
accessory
RGB cable
Computer
Monitor
To RGB
input port
Computer RGB cable
(sold separately)
Power cord
-55