Adjust The Projected Image - Sharp Notevision PG-B10S Operation Manual

4.

Adjust the projected image

1 1 1 1 1 Bring the projected image into focus and adjust the projected image size
Focus
Bring the projected
image into focus
using the focus ring.
2 2 2 2 2 Adjust the projected image position and the projector angle
Projection position
Adjust the
projected
image position
using the lens
shift lever.
3 3 3 3 3 Correct trapezoidal distortion
Correcting trapezoidal distortion using the Keystone Correction.
On the projector
On the remote
control
5.
Select the INPUT mode
Select the "INPUT 1" using the INPUT button on the projector or the INPUT 1 button on the remote control.
On the On the remote
projector
When pressing on the projector, input mode switches in order of
When using the remote control, press
Page 22
Page 25
Compresses
upper side.
On-screen display (RGB)
control
/
Zoom
Adjust the
projected
image size
using the
zoom knob.
Angle
Adjust the
projector
angle using
the HEIGHT
ADJUST
button.
On-screen display (Component)
to switch the INPUT mode.
/
zoom in
zoom out
Page 22
Page 23
Compresses
lower side.
Page 20
INPUT 1 INPUT 2 INPUT 3 .
Page 19
-17