Video System (Setting The Video System); Background; (Selecting A Startup And Background Image) - Sharp Notevision PG-B10S Operation Manual

Using the "Options" Menu
Video System
Video System)
The video input system mode is preset to "Auto";
however, a clear picture from the connected au-
dio-visual equipment may not be received, de-
pending on the video signal difference. In that
case, switch the video signal.
Select "Video System" on the "Options" menu
and the appropriate video system.
Setting the menu screen
Example: "Options" menu screen for
INPUT 2 (S-Video) mode
Description of Video Systems
Selectable settings
When connected to PAL video
PAL
equipment.
When connected to SECAM video
SECAM
equipment.
When reproducing NTSC signals in
NTSC4.43
PAL video equipment.
When connected to NTSC video
NTSC3.58
equipment.
Note
• The video signal can only be set in INPUT 2 or
INPUT 3 mode.
• When the system mode is set to "Auto", you
may not receive a clear picture due to signal
differences. Should this occur, switch to the
video system of the source signal.
-42
(Setting the
Page 34
Description

Background

Startup and Background Image)
Select "Background" on the "Options" menu and
the image displayed upon the projector's startup
and when no signal is being sent to the projec-
tor.
Setting the menu screen
Example: "Options" menu screen for
INPUT 2 (S-Video) mode
Description of Background Images
Selectable settings
Sharp SHARP default image
Blue Blue screen
None
Black screen
Note
• If the input signal has interference, the screen
will be displayed during interference.
(Selecting a
Page 34
Sharp
Blue
None
Description