Connecting To A Monitor With Rgb Input Terminal; Samples Of Cables For Connection - Sharp XG-C455W Operation Manual

Accesso Quick S
Ensure th
Remote C
setting up
When connec When connec
How to Access the PDF Operation Manuals Part Names and Functions
Projector
Controlling the Projector by a Computer

Samples of Cables for Connection

Part Names and Functions Connecting to Video Equipment Connecting to a Computer IMPORTANT SAFEGUARDS
This section shows the basic operation (projector connecting with the computer). For details, see the page
When connecting to the LAN terminal using a LAN cable Numbers in Supplied accessories PDF operation manuals in several languages are included in the CD-ROM, so that you can
described below for each step.
Equipment
work with the projector. To utilize these manuals, you need to install Adobe
The projector employs the DVI digital input terminal for direct input of Digital Video signals from a
STANDBY button
Setup and Projection
computer (Windows
Audio-visual
Power indicato
For putting the projector into
computer.
In this section, connection of the projector and the computer is explained using one example.
equipment
To audio output terminal standby mode.
Caution concerning the lamp unit
STANDBY/ON
Please download Adobe
Potential hazard of glass par-
Top View To S-video output terminal
For turning the po
KEYSTONE button
ticles if lamp ruptures. In case
HUB Computer putting the proje
For entering the Keystone
of lamp rupture, contact your
Accessing the PDF Manuals
standby mode.
Correction mode.
or
nearest Sharp Authorized Pro-
KEYSTONE bu
®
For Windows :
Computer
ENTER button
jector Dealer or Service Cen-
Remote control
For entering the K
1 Insert the CD-ROM in the CD-ROM drive.
For setting items selected or
ter for replacement.
Correction mod
<RRMCGA623WJSA>
adjusted on the menu.
2 Double click the "My Computer" icon.
See "Regarding the Lamp" on
Adjustment but
*
3 Double click the "CD-ROM" drive.
Power cord page 61.
(1)
4 When you want to view the operation manual
L-CLICK button
For selecting and
For the Left click when with the 1) Double click the "MANUALS" folder.
on-screen items
Caution concerning the setup of the pro-
USB connection (using a USB
2) Double click the language (name of the
Note
RETURN butto
jector cable or the optional
folder) that you want to view.
remote receiver).
For returning to th
ï When connecting to hub, use straight-through Category 5 (CAT.5) type cable (commercially available). For minimal servicing and to maintain high
For U.S., Canada, etc.
RCA audio cable
3) Double click the pdf file to access the pro-
MAGNIFY (Enlarge/Reduce)
ï When connecting to computer, use cross-over Category 5 (CAT.5) type cable (commercially available).
image quality, SHARP recommends that this
(commercially available)
(6' (1.8 m))
INPUT buttons
jector manuals.
projector be installed in an area free from hu-
<QACCDA007WJPZ>
For enlarging/reducing part of the
For switching inp
midity, dust and cigarette smoke. When the When you want to view the setup manual
When connec
projector is subjected to these environments,
1) Double click the "SETUP" folder.
To audio output
PAGE Up/Down buttons
the vents and lens must be cleaned more
*
Use the power cord that corresponds to the wall outlet in your country. 2) Double click the language (name of the
terminal
Same as the [Page Down] and

Connecting to a Monitor with RGB Input Terminal

often. As long as the projector is regularly
folder) that you want to view.
[Page Up] keys on a computer
cleaned, use in these environments will not
keyboard, when with the USB
4 3) Double click the pdf file to access the setup Tilt dial
reduce the overall operation life of the unit.
connection (using a USB cable or
manual.
Internal cleaning should only be performed
the optional remote receiver).
You can display computer images on both the projector and a separate monitor using two sets of RGB cables.
by a Sharp Authorized Projector Dealer or
1.
For enlarging/
Place the projector facing a screen BREAK TIMER button
Service Center.
reducing the pic
For displaying the break timer.
Front View
To audio output terminal
Do not set up the projector in places ex-
Lens cap (attached)
* When using the ø3.5 mm mono audio cable, the volume level will be half of when using the ø3.5 mm stereo audio cable. AUTO SYNC button
To video output terminal
Tilt dial
posed to direct sunlight or bright light.
For automatically adjusting images
Info
<PCAPHA026WJSA>
Position the screen so that it is not in direct
when connected to a computer.
ï If the desired pdf file cannot be opened by double clicking the mouse, start Adobe sunlight or room light. Light falling directly on
Height Adjustme
ï Operation manual (this manual <TINS-D563WJZZ> and CD-ROM <UDSKAA102WJZZ>)
Monitor
the screen washes out the colors, making
specify the desired file using the "File", "Open" menu.
PICTURE MODE button
button
viewing difficult. Close the curtains and dim
For switching the picture mode.
the lights when setting up the screen in a
2.
Adjustment foot Note
INPUT buttons
sunny or bright room.
Connect the projector to the computer and plug the power
For switching to the respective
ï Codes in "< >" are Replacement parts codes.
cord into the AC socket of the projector
The projector may be safely tilted to a
Amplifier
Optional accessories
maximum angle of 9 degrees.
Using the Remote Control with a Signal Cable Push both sides
Placement should be within ±9 degrees of
Lamp unit
horizontal.
When the signals from the remote control cannot be reached due to the positioning of the projector, use a
RCA audio cable
Ceiling-mount adaptor
(commercially available)
ø3.5 mm minijack cable to connect the remote control to the projector. Now you can control the projector
with the remote control.
Universal bracket
Ceiling-mount unit
Projector
(Rear view)
When connecting equipment other than the computer, see pages
Attaching the lens cap
After putting the lens cap strap on the lens
3.
Remove the lens cap and turn the projector on Note
Remote receiver
cap, pass the other end of the strap
When using the projector in high-altitude
through the hole on the front side of the
3 RCA to 15-pin D-sub cable (10' (3.0 m))
areas such as mountains (at altitudes of
ï When you connect video equipment with a 21-pin RGB output (Euro-scart) to the projector, use a com-
projector, next to the lens, as shown in
approximately 1,500 meters (4,900 feet)
mercially available cable that fits in the projector terminal you want to connect.
the illustration.
or more)
Note
Note
When you use the projector in high-altitude
ï The wireless remote function is not possible when the ø3.5 mm minijack cable is connected to the projector.
areas with thin air, set "Fan Mode" to "High".
ï Some of the optional accessories may not be available depending on the region. Please check with your
Should the wireless remote operation be required, the ø3.5 mm minijack cable should be disconnected
Neglecting this can affect the longevity of the
nearest Sharp Authorized Projector Dealer or Service Center.
from the projector.
optical system.
-6
Downloaded From projector-manual.com Sharp Manuals Downloaded From projector-manual.com Sharp Manuals Downloaded From projector-manual.com Sharp Manuals Downloaded From projector-manual.com Sharp Manuals Downloaded From projector-manual.com Sharp Manuals Downloaded From projector-manual.com Sharp Manuals Downloaded From projector-manual.com Sharp Manuals Downloaded From projector-manual.com Sharp Manuals Downloaded From projector-manual.com Sharp Manuals Downloaded From projector-manual.com Sharp Manuals
refer to the main pages in this operation manual where the topic is explained.
Terminal on
30á59
connected equipment
30
®
or Macintosh
ø3.5 mm stereo minijack to RCA audio cable
30
(commercially available)
Audio
® ®
Reader from the Internet (http://www.adobe.com).
output
32
terminal
Two R-6 batteries
32
("AA" size, UM/SUM-3,
HP-7 or similar)
44
Terminal Connect with the cable adaptor, etc.
43
for using
the
CAUTION
LAN cable (Category 5 type, commercially available)
dedicated
( ' / " / \ / | )
PRECAUCIÓ N
(2)
39 PRÉ C AUTION
cable
Dedicated cable
43
For Europe, except U.K.
34
36
display.
(6' (1.8 m))
buttons
RCA audio cable (commercially available)
<QACCVA011WJPZ>
Audio
image.
output
39
terminal
Terminal Connect with the cable adaptor, etc.
33
for using
Zoom knob the
dedicated
35
cable
Dedicated cable
31
Lens cap strap
35
Monitor
<UBNDTA017WJZZ>
31
36 RGB cable (supplied or commercially available)
RGB
31
input
34
terminal
input modes.
ø3.5 mm stereo minijack to RCA audio cable
To RGB input terminal
(commercially available)
Audio
attach or remo
input
Composite video cable (commercially available)
terminal
To WIRED
REMOTE terminal
ø3.5 mm minijack cable (commercially available or
RGB cable (commercially available) available as Sharp service part QCNWGA038WJPZ)
Cable
®
).
Warning about placing the projector in a
high position
3 7 STANDBY/ON button
When placing the projector in a high posi-
RGB cable
tion, make certain it is carefully secured to
6 INPUT buttons
For Macintosh
(10' (3.0 m))
avoid personal injury caused by the projec-
1 Insert the CD-ROM in the CD-ROM drive.
<QCNWGA045WJPZ>
6 ENTER button
tor falling down.
2 Double click the "CD-ROM" icon.
Video Equipment
Cable adaptor
3 When you want to view the operation manual
(commercially available)
Do not subject the projector to hard im-
(3)
1) Double click the "MANUALS" folder.
To LAN terminal
pact and/or vibration.
2) Double click the language (name of the
To AUDIO input terminal
Take care with the lens so as not to hit or
folder) that you want to view.
(for DVI-D)
ø3.5 mm stereo minijack to RCA audio
damage the surface of the lens.
To DVI digital
3) Double click the pdf file to access the pro-
cable (commercially available)
5 Zoom knob
output terminal
For U.K., Hong Kong
S-video cable (commercially available)
jector manuals.
Rest your eyes occasionally. and Singapore
When you want to view the setup manual
5 Focus ring
(6' (1.8 m))
Continuously watching the screen for long
1) Double click the "SETUP" folder.
<QACCBA036WJPZ>
hours will cause eye strain. Take regular
DVI Digital cable
2) Double click the language (name of the
(commercially available)
breaks to rest your eyes.
folder) that you want to view.
3) Double click the pdf file to access the setup
Avoid locations with extremes of tem-
manual.
4 Height Adjustment buttons
perature.
* ø3.5 mm stereo or mono audio cable
The operating temperature of the projector
Cable adaptor
(commercially available or available as
(commercially available)
Sharp service part QCNWGA038WJPZ) is from 41°F to 95°F (+5°C to +35°C).
The storage temperature of the projector is
from –4°F to 140°F (–20°C to +60°C).
Supplied
Computer
accessory
Do not block the intake and exhaust
vents.
Allow at least 7
between the exhaust vent and the nearest
Video Equipment
To COMPUTER/ wall or obstruction.
COMPONENT 1
Ensure that the intake vent and the exhaust
input terminal
vent are not obstructed.
To RGB output
terminal
If the cooling fan becomes obstructed, a pro-
tection circuit will automatically put the pro-
AN-C430LP
jector into standby mode to prevent overheat
AN-60KT
damage. This does not indicate a malfunc-
AN-XGCM55 (for U.S.A. only)
AN-JT200 (for U.S.A. only)
tion (see pages
AN-TK201 <for AN-60KT>
jector power cord from the wall outlet and wait
AN-TK202 <for AN-60KT>
To WIRED
at least 10 minutes. Place the projector where
R/C JACK
AN-EP101B <for AN-XGCM55 and AN-JT200>
the intake and exhaust vents are not blocked,
(for U.S.A. only)
plug the power cord back in and turn on the
RGB cable
AN-MR2
projector. This will return the projector to the
AN-C3CP2
On the projector
normal operating condition.
T e rm
AUD
30á5 ®
Reader
WIRED R/C JACK
TX/RX LED (yellow)
Lamp
For controlling the projector by connecting
Illuminates when transmitting/receiving data.
59
LINK LED (green) (for COMPUTER/
the remote control to the projector.
Illuminates when linked.
COMPONENT 1, 2, DVI-D)
Temp
30
To S-VIDEO input terminal
ON button
indica 7
44 35
For turning the power on.
To AUDIO input terminal
AUT
43
DIN-D-sub RS-232C
MENU button
* To ensure safety, do not connect the
®
:
For displaying adjustment and 3
For au
adaptor
LAN terminal with any cables such
setting screens.
image
57
/
(5
64
as a telephone line that may cause a com
39·43 MOUSE/Adjustment buttons
<QCNWGA091WJPZ>
excessive voltage.
ENTE
(' /" /\ /| )
Ä For moving the computer cursor
(4) For se
34
when with the USB connection
or adj
(using a USB cable or the optional
Volum
remote receiver).
For ad
Ä For selecting and adjusting on-
43
sound
screen items.
For Australia, New
39·43 Zealand and Oceania
MEN
R-CLICK/RETURN button
AUDIO
Ä For the Right click when with the
(6' (1.8 m))
For d
(for VIDEO, S-VIDEO)
35 USB connection (using a USB
and se
<QACCLA018WJPZ>
6
cable or the optional remote receiver).
ECO+
Ä For returning to the previous
display.
For lo
coolin
34
Volume buttons
lamp
For adjusting the speaker sound
level. 33
34
Focu
AV MUTE button
For temporarily displaying the black
For a
51
screen and turning off the sound.
Storage case
Spea
35 15
FREEZE button
RCA audio cable
To VIDEO input terminal
<GCASNA020WJSA>
For freezing images.
(commercially available)
To AUDIO input terminal
Rem
®
Reader
sens
37
RESIZE button 31
MONITOR OUTPUT
7
/ inches (20 cm) of space
8
For switching the screen size
Heig
(NORMAL, STRETCH, etc.).
butto
31
35
ECO+QUIET button
For lowering the noise of the cooling
To MONITOR OUT terminal
Adju
56á5 fan and extending the lamp life.
AUDIO
Air fi
(MONITOR OUT)
(on th
59 and 60). Remove the pro-
Remote control
25, 28 and 29.
On the remote control
proj
®
on your
STANDBY
button
ON button
" (15 cm))
To DVI-D input terminal
COMPUTER 1
button
RGB cable
®
first, then
Page 18
Pages 23, 30
Page 30