Connecting To A Monitor With Rgb Input Terminal; Connecting To An Amplifier Or Other Audio Equipment - Sharp XV-Z100 Operation Manual

Connecting to a Monitor with RGB Input Terminal

You can display computer images on both the projector and a separate monitor using two sets of RGB cables.
Computer
To RGB
output
terminal
RGB cable (commercially available)
Note
• RGB signals and Component signals can be output to the monitor.

Connecting to an Amplifier or Other Audio Equipment

The audio input from devices connected to the AUDIO INPUT terminals on the projector can be
output to audio equipment. The audio output is determined according to the selected input mode.
Amplifier
Note
• ø3.5 mm minijack to RCA audio cable (commercially available) is required.
• Before connecting, ensure that both the projector and the audio equipment to be connected are
turned off.
• When turning off the projector while it is connected to audio equipment, ensure that you turn off the
audio equipment first and then the projector.
• The volume level of external equipment changes in accordance with the volume level of the projector.
26
To INPUT 1
terminal
To audio input terminal
To OUTPUT
(INPUT 1, 2)
terminal
RGB cable (commercially available)
To AUDIO OUTPUT terminal
ø3.5 mm minijack to RCA audio
cable (commercially available)
Monitor
To RGB
input
terminal