Performance Characteristics - Bosch AMC2 Series Installation Manual

20 en | Introduction
3.3

Performance Characteristics

–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Notice!
For UL installations, the Bosch APS-PSU-60 power supply may
be used, and must be located in the same room as the
connected AMC2 device. Recommended maximum distance
between power supply unit and AMC2 is 3 m (9.84 ft).
2018-09 | AMC2-4W_UL |
Intelligent access manager for 1 - 4 entrances (for example,
doors, man traps, barriers)
Host address selectable using DIL sliding switch
Ethernet host interface
Four peripheral input devices using Wiegand interface
Eight relay outputs
– voltage free, power is supplied externally (dry mode)
– powered by internal power supply (wet mode)
Eight analog inputs with internal power supply
Battery buffered SRAM and real time clock (RTC)
Pluggable Compact Flash card
Liquid Crystal Display
Transfer rate host interface Ethernet: 10/100 Mbit/s
Transfer rate to the extension interface: 9,6 kBit/s
Self regulating transmit/receive switching
Tamper contact for external covers
Power supply: 10 V to 14 Vdc, max. 3 A
Tamper contact for external covers
AMC2 Modular
Controller
Bosch Access Systems GmbH