Unmounting - Bosch AMC2 Series Installation Manual

24 en | Installing
4.2

Unmounting

Notice!
To remove the AMC2-4W from a mounting rail, first remove all
pluggable connectors.
Push down the AMC2-4W until the lower edge snaps out of the
mounting rail [1]. Pull the lower end of the AMC2-4W from the
mounting rail [2].
Figure 4.2: Unmounting the AMC2 from a mounting rail
2018-09 | AMC2-4W_UL |
AMC2 Modular
Controller
Bosch Access Systems GmbH