16
en | Introduction
3.3
Performance Characteristics
–
–
–
–
–
–
–
–
–
Notice!
If an external power supply is used, this should also guarantee
an uninterruptable power supply (UPS). Example: Bosch power
supply APS-PSU-60 (F.01U.282.970).
3.4
System Overview
The AMC2-4WE is connected between the access controller
AMC2-4W and the various peripheral devices.
2016-11 | AMC2-4WE |
Controlled by an AMC2 via RS-485
Reader interfaces
–
four Wiegand interfaces
Eight relay outputs
–
voltage free, power is supplied externally (dry mode)
–
powered by internal power supply (wet mode)
Eight analog inputs with internal power supply
Transfer rate to the extension interface: 9,6 kBit/s
Self regulating transmit/receive switching
Power supply:
–
10V - 30Vdc - max. 5 A
–
or over the RS-485 host connector
Information about the inputs and outputs on the display of
the AMC2 controller
Tamper contact for external covers
AMC2 Wiegand
Bosch Sicherheitssysteme GmbH
Extension