Technical Data - Bosch AMC2 Series Installation Manual

AMC2 Modular
Controller
7

Technical Data

Hardware
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Power input
10 to 30 Vdc, max 3 A
Bosch Access Systems GmbH
Integrated Microcontroller (32 bit, 30 MHz)
SRAM (256 kB)
Serial EEPROM
RTC (real time clock)
Pluggable Compact Flash card
Battery for SRAM and RTC
DIL switch for host settings (address and protocol mode)
Host interfaces
– Ethernet 10/100 Mbit/s
Four Wiegand interfaces for up to four card readers
(Output rating: 280 mA each @ 11.8-12Vdc)
Eight relay outputs
– maximum ratings (wet and dry):
switching voltage: 30 Vdc
switching current: 1,25 A
– operating ratings (dry):
1,25 A @ 30 Vdc
2 A @ 12 Vdc
1,5 A @ 24 Vdc
– operating ratings (wet):
8.9-30 Vdc, 1.25 A
(voltage output is dependent on board voltage input)
Eight analog inputs with tamper detection; only connect dry
contacts
RS-485 extension interface:
Transfer rate: 9,6 kBit/s,
no parity, 8 bit, 2 stop bit
Tamper contact for external enclosures
RS-485 output power rated maximum 2.5 A @ 9.0-30 Vdc
(voltage output is dependant on board voltage input)
Technical Data | en
2018-09 | AMC2-4W_UL |
59