G Finisher Functions; Finisher Functions - Sharp AR-M451N Operation Manual

FINISHER

Finisher functions

I I I I Sort mode
Sorted sets will be delivered.
Original
I I I I Offset mode
Offset mode
I I I I Staple sort mode
Collated sets will be stapled and delivered to the offset tray. The stapling positions, orientation, paper size for
stapling, and stapling capacity are shown below.
Stapling positions
Top left corner of
printouts
Centre left two
positions of printouts
Lower left corner
of printouts
NOTES
G Stapling can only be done when the offset tray has been selected.
G If mixed paper sizes are selected for stapling jobs, stapling will be automatically cancelled.
NOTE
Transparency film heavy paper, punched paper, labels , envelopes and postcards cannot be stapled.
3-8
Printouts
Non-offset mode
Portrait orientation
Available paper sizes: A4, B5,
and 8-1/2" x 11"
Stapling capacity: Up to 30
sheets for any available sizes
Same as above
Same as above
I I I I Group mode
Groups of prints or copies of the same page will be
delivered.
Original
Sets will move from side to side so that each set or
group will be offset from the previous set or group
for easy separation. The offset function can only be
used in the offset tray.
Stapled sets will not be offset.
Landscape orientation
Stapling cannot be made.
Printouts