Sharp AR-M451N Operation Manual page 178

SPECIFICATIONS
Type
Print system
Photoconductive type
Developer system
Fusing system
Resolution
Gradation
Originals
Copy paper
Copy sizes
Warm-up time
First-copy time
Copy ratio
Continuous copy
Dimensions
(including automatic
document feeder)
Weight (main unit only)
Overall dimensions
(When tray is extended)
Required power supply
Operating conditions
Automatic document feeder
Name
Original size
Weight of originals
Number of originals
Power supply
Dimensions
Weight
* Maximum of 15 sheets when originals are heavier than 105 g/m
this, scanning of the originals will not take place correctly and an extended image may result.
Some discrepancies may exist in the illustrations and content due to improvements to the machine.
8-2
Console
Electrophotographic system
OPC drum
Dry-type two-component magnetic brush development
Heater roller
Scan: 600 x 600 dpi, output: 600 x 600 dpi
256 levels
Sheets, bound documents
Maximum size: A3 or 11" x 17"
Plain paper and special papers
Max. A3 or 11" x 17", min. A5R or 5-1/2" x 8-1/2"R, Postcard
Image loss: Max 8 mm or 21/64" (leading edge and trailing edge in total),
max. 8 mm or 21/64" (along all other edges in total)
80 seconds or less
AR-M351N
4.9 seconds or less*
AR-M451N
4.4 seconds or less*
* Conditions: The document glass is used and A4 size paper is fed horizontally from
the machine tray (tray 1).
Variable: 25 to 400% in 1% increments, total 376 steps
Fixed presets: 25%, 50%, 70%, 81%, 86%, 100%, 115%, 122%, 141%, 200%
and 400% for AB system, 25%, 50%, 64%, 77%, 100%, 121%, 129%, 200% and
400% for inch system.
999 copies
826 mm (W) x 665 mm (D) x 1127 mm (H)
(32-33/64" (W) x 26-11/64" (D) x 44-23/64" (H))
Approx. 100 kg (Approx. 220.5 lbs.)
963 mm (W) x 665 mm (D) (37-29/32" (W) x 26-11/64"(D))
For power supply requirements, see the name plate located on the back of the
main unit.
Temperature: 10°C to 30°C (50°F to 86°F)
Humidity: 20% to 85%
B/W scanner module/DSPF
A3 to A5 (11" x 17" to 5-1/2" x 8-1/2")
50 to 128 g/m (14 to 34 lbs.)
2
Maximum 50 sheets (maximum 30 A3 or B4 (11" x 17" or 8-1/2" x 14") size
sheets*), stack height must not exceed the heights indicated below.
50 to 80 g/m (14 to 21 lbs.): 6.5 mm (17/64") or less
2
80 to 128 g/m (21 to 34 lbs.): 5 mm (13/64") or less
2
Supplied from machine
824 mm (W) x 606 mm (D) x 190 mm (H) (32-7/16" (W) x 23-55/64" (D) x 7-31/64" (H))
Approx. 21.0 kg (46.3 lbs.)
(28 lbs.). If the number of placed sheets exceeds
2