G Staple Cartridge Replacement; Staple Cartridge Replacement - Sharp AR-M451N Operation Manual

FINISHER

Staple cartridge replacement

When the staple cartridge becomes empty, the message "Add staples." will appear in the message display of the
operation panel.
Follow the procedure below to replace the staple cartridge.
1 Open the front cover.
2 Turn the staple unit to face up.
3 Pull the release lever for the staple box
and remove the box.
Remove the empty staple cartridge from
4
the staple box.
Insert a new staple cartridge into the
5
staple box aligning the arrow of the staple
cartridge with that of the staple box.
3-10
When reinstalling the
staple box, push it in
until it clicks into plac
e.
NOTES
G Do not remove the tape from the cartridge before
inserting the staple cartridge into the box.
G When reinstalling the staple box, push it in until it
clicks into place.
6 Remove the tape from the staple cartridge
by pulling it straight.
7 Reinstall the staple box.
8 While pushing the staple unit release lever
to the left, rotate the staple unit to face
down.
Close the front cover.
9
NOTE
Make a test print or copy in the staple sort mode to
ensure that stapling is performed properly.
Push the staple box in
until it clicks into place.