Sharp AR-M451N Operation Manual page 156

SAVING A DOCUMENT IMAGE FILE
Touch the [OK] key.
9
FOLDER OK
2/2
10 If needed, select the
checkbox (only in copy mode).
FILE INFORMATION
CONFIDENTIAL
USER NAME
FILE NAME
GIf
you selected
checkbox, touch the [PASSWORD] key and
enter a password.
GIf you did not select the [CONFIDENTIAL]
checkbox, go to step 16. The file will be saved
as a [SHARING] file.
11 Touch the [PASSWORD] key.
PASSWORD
XYYY
Enter a 5-digit password with the numeric
12
keys.
CANCEL
ENTER PASSWORD VIA THE 10-KEY PAD.
13 Touch the [OK] key.
0
CANCEL OK
10-KEY PAD.
7-8
The touched folder is
selected and you return
to the screen of step 7.
The selected folder
name is displayed.
[CONFIDENTIAL]
When this is selected, the
file is stored with the
attribute [CONFIDENTIAL].
To call up the file, the
password that will be set in
the following steps must be
entered.
the [CONFIDENTIAL]
The password entry
CAN
screen appears.
As each digit is entered,
"-" changes to " ".
You will return to the screen of step 10.
14
The set password is displayed with " ".
CANCEL
PASSWORD
XYYY
15 Touch the [OK] key.
You will return to the main screen.
Press the [START] key on the operation
16
panel.
17 The saved image can be called up using
the file name, folder name, or user name,
or from the filing folder.
GTo call up the image by entering the file name,
folder name, or user name, see "Searching
for and calling up a saved file" on page 7-13.
GTo call up the image from the filing folder, see
"Calling up and using a saved file" on page 7-
15.
The following
18
performed on the image that was called
up:
GPrint the image (page 7-16)
GTransmit the image (page 7-17)
GChange the attribute (page 7-18)
GMove the image (page 7-19)
GDelete the image (page 7-19)
GCheck details on the image (page 7-19)
OK
When copying begins,
the image is saved.
operations can be