Sharp AR-M451N Operation Manual page 112

SPECIAL MODES
I I I I Procedure for inserting front and back cover paper
The paper for the front cover is called the front cover paper ("FRONT COVER" in the touch panel). The paper
for the back cover is called the back cover paper ("BACK COVER" in the touch panel).
GExamples of insertion methods for the front and back cover paper are given on pages 5-17 to 5-20.
To display the special modes screen...
See "General procedure for using special
functions" on page 5-2.
1 Touch the [COVERS/INSERTS] key in the
special modes screen (2nd screen).
SPECIAL MODES
TRANSPARENCY
COVERS/INSERTS
INSERTS
BOOK COPY CARD SHOT
2 Touch the [PAPER TRAY SETTINGS] key.
COVERS/INSERTS
INSERTION
FRONT COVER
TYPE A SETTING
INSERTION
BACK COVER
TYPE B SETTING
Select the tray used for the front cover
3
paper.
PAPER TRAY SETTINGS
FRONT COVER BACK COVER
TRAY2 TRAY2 TRAY2
A4 A4
PLAIN PLAIN
(X) (Y)
(1)The tray name (tray position) selected for the
front cover paper and the paper size and type
are shown in (X). If the tray in which you
loaded paper for the front cover is shown, touch
the [OK] key. You will return to the screen of
step 2.
(2)If the correct tray for the cover sheet paper
does not appear in (X), touch the (Y) key. The
tray selection screen will appear. Select the
tray in which you loaded paper for the front
cover. You will return to the screen of above.
Touch the [FRONT COVER] key in the
4
screen of step 2.
5-12
CANCEL OK
PAPER TRAY
SETTINGS
INSERTION
SETTINGS
PAGE LAYOUT
OK
INSERTION INSERTION
TYPE A TYPE B
TRAY2 TRAY2
A4 A4
PLAIN PLAIN
5 Set the insertion conditions for the front
cover paper.
PLEASE SET UP A FRONT COVER.
FRONT COVER SETTING
PRINT ON FRONT COVER
YES NO 1-SIDED
(X)
(1) Select whether or not the front cover paper is to be
copied on with the (X) keys ([YES] or [NO]).
(2) Select whether one-sided copying or two-sided
copying is to be performed on the front cover
paper with the (Y) keys. This selection is only
possible when the [YES] key of (X) has been
selected. (The one-sided/two-sided selection
made here only applies to the front cover paper.
When the back cover paper is selected, the
selection only applies to the back cover paper.)
(3)The (Z) key shows the tray selected for the front
cover paper in step 3 and the paper size and
type.
Touch the [OK] key in the screen of step 5.
6
You will return to the screen of step 2.
When you return to the screen of step 2, the
[FRONT COVER] key will be highlighted.
7 To insert back cover paper, repeat steps 2
through 6, using the [BACK COVER] key
instead of the [FRONT COVER] key.
PLEASE SET UP COVERS/INSERTS.
SPECIAL MODES
COVERS/INSERTS
INSERTION
FRONT COVER
TYPE A SETTINGS
INSERTION
BACK COVER
TYPE B SETTINGS
8 Touch the [PAGE LAYOUT] key in the
screen of step 7 to display a list of the
selected settings (page 5-15).
To exit the cover/insert settings, touch the
upper [OK] key in the screen of step 7.
Press the [START] key.
9
To cancel covers/inserts settings...
Touch the [CANCEL] key in the screen of step 2.
0
CANCEL OK
PAPER TRAY
TRAY2
2-SIDED
A4
PLAIN
(Y) (Z)
0
OK
CANCEL OK
PAPER TRAY
SETTINGS
INSERTION
SETTINGS
PAGE LAYOUT