Replacement Of Fuses; Instructions Of Rotor And Tube; The Rotor Instructions - Scilogex DM0636 User Manual

USER MANUAL

Two holes are located on the both sides in the top right corner of the cover.

Insert a screw driver into the hole and push forward to release the door.

10.3 Replacement of fuses

 （1）There are two fuses, 250V, 6.3A time-delay type

（2） The fuse holder is located in the power inlet. Pull out the fuse holder from power inlet and replace
the fuses if necessary.

11. Instructions of rotor and tube

CAUTION：

Read the instructions thoroughly, correct use rotor.

Do not exceed the allowable maximum speed of rotor、 tube and adapters etc., be care that the allowable
maximum speed of some adapters are lower than the rotor‟s maximum speed.

11.1 The rotor instructions

11.1.1 Rotor structure
11.1.2 Available rotors and adapters
Closed angle rotors, such as AS30-2, AS18-5V, AS60-2, AS12-PCR8, AS6050V, are used for bio-safe
when the rotor lid was tightened with the rotor, centrifuge tubes will be enclosed into rotor to ensure the
sample does not leak in centrifugal process. If rotor lid is not available, the rotor would be no bio-sealing
function. The rotors can be used as follows:
Knob Locking nut
Seal ring
Figure 11-1 The rotor structure
16
size: Ф5×20.
,
Cover
identify ring