Scilogex DM0636 User Manual page 14

USER MANUAL
After self-checking, instrument will display accumulative running time, see figure below:
Figure 8-2 indicates the centrifuge has accumulated running time 1657 hours 12 minutes and 9 seconds, and
then the centrifuge displays the last running values, see figure 8-3 below:

Speed: 6000rpm. Running time: 30 minutes.

The door lock is released.
8.1.1 Load and replace the rotor
CAUTION

Attach the rotor to the rotor shaft. Ensure the rotor is in position and connected with the shaft,
tightening the locking nut to secure the rotor with shaft, to prevent the rotor damaging the centrifuge.

Ensure the rotor lid is firmly tightened to the rotor.

Load the rotor to shaft to ensure rotor is in position until it connected with the shaft.
 You should feel a „click‟ when the rotor is properly loaded to the shaft. If not, there may be something
Figure Accumulative running time interface
8-2
Figure Last running interface
8-3
Figure 8-2 Load the rotor