elsner elektronik KNX K8 Installation And Adjustment page 7

Buttons
brief button press (<0,5 s)
button press >0,5 s
long button press (>3 s)
LEDs
Behaviour of the LEDs for the output channels
in Automatic mode:
Off
On
in Manual mode:
Flashes slowly
Flashes fast
KNX K8 actuator • Version: 26.02.2016 • Technical Changes and Errors excepted.
6
LED shows current status (see ETS parameter: Channel
LED)
in Automatic mode: Switching to Manual mode
in Manal mode: Switching from manually ON to
manually OFF and reverse
Switching to Automatic mode (when activated in ETS)
Actuating variable = 0%
Actuating variable > 0%
Manually OFF
Manually ON
Installation and start-up