6.2.2.3. Blocking function (switch functions) ........... 32 6.2.3. Button input (switch functions) - Input as bus button ......33 Elsner Elektronik GmbH • Sohlengrund 16 • 75395 Ostelsheim • Germany Radio Actuator KNX RF S1R-B2 compact • from application 1.0...
Page 4
Clarification of signs Installation, inspection, commissioning and troubleshooting of the device must only be carried out by a competent electrician. This manual is amended periodically and will be brought into line with new software releases. The change status (software version and date) can be found in the contents footer. If you have a device with a later software version, please check www.elsner-elektronik.de in the menu area "Service"...
The device may only be used as a fixed-site installation; that means only when assem- bled and after conclusion of all installation and operational start-up tasks and only in the surroundings designated for it. Radio Actuator KNX RF S1R-B2 compact • Version: 16.09.2020 • Technical changes and errors excepted.
Other wireless devices and powerful local transmitters (e.g. wireless headphones), which transmit on the same frequency. Please maintain a minimum distance of 30 cm between wireless transmitters for that reason. Radio Actuator KNX RF S1R-B2 compact • Version: 16.09.2020 • Technical changes and errors excepted.
10 m. Follow the guidelines and standards for SELV electric circuits while installing and cable laying of the inputs! Radio Actuator KNX RF S1R-B2 compact • Version: 16.09.2020 • Technical changes and errors excepted.
Two consumer loads 230 V AC: Mains Mains (230 V AC) (230 V AC) Each terminal contact may be loaded with a maximum of 10 A. Radio Actuator KNX RF S1R-B2 compact • Version: 16.09.2020 • Technical changes and errors excepted.
The device is supplied with the bus address 15.15.255. You can program another ad- dress into the ETS by overwriting the 15.15.255 address or by teaching via the pro- gramming button. Radio Actuator KNX RF S1R-B2 compact • Version: 16.09.2020 • Technical changes and errors excepted.
After use, the device must be disposed of or recycled in accordance with the legal reg- ulations. Do not dispose of it with the household waste! Radio Actuator KNX RF S1R-B2 compact • Version: 16.09.2020 • Technical changes and errors excepted.
Button inputs: Configuration as actuator button, bust button or for zero position sensor (see Button inputs (drives) - Input as bus button, page 25) Radio Actuator KNX RF S1R-B2 compact • Version: 16.09.2020 • from application 1.0 • Technical changes and errors excepted.
10 ms (only for manual input) for position movement from all other 0 ... 600 positions in 10 ms (only for manual input) Radio Actuator KNX RF S1R-B2 compact • Version: 16.09.2020 • from application 1.0 • Technical changes and errors excepted.
Page 18
Perform a reference movement no • yes Perform a reference movement for more than 1 ... 255; 10 movements before an auto positioning movement Radio Actuator KNX RF S1R-B2 compact • Version: 16.09.2020 • from application 1.0 • Technical changes and errors excepted.
(see graphic in chapter Connection options for zero position sensors in the general part). Radio Actuator KNX RF S1R-B2 compact • Version: 16.09.2020 • from application 1.0 • Technical changes and errors excepted.
Page 20
Direction of reference travel • in safe position • in closed position (move out shading) • in open position (window) • shortest route Radio Actuator KNX RF S1R-B2 compact • Version: 16.09.2020 • from application 1.0 • Technical changes and errors excepted.
Page 21
The movement limits are activated here, and can them be configured in their own menu items. See ‘Movement limits’ on Page 30. Radio Actuator KNX RF S1R-B2 compact • Version: 16.09.2020 • from application 1.0 • Technical changes and errors excepted.
Page 22
• 0 for automatic | 1 for manual Send delay of the status output 0...50 Automatic or Manual in 0.1 sec Radio Actuator KNX RF S1R-B2 compact • Version: 16.09.2020 • from application 1.0 • Technical changes and errors excepted.
Page 23
1bit object (smaller or larger than a threshold value), as well as a 16bit object (measurement value). Designation [Wind blocking] Enter a designation here! Type of input object 1 bit • 16 bit Radio Actuator KNX RF S1R-B2 compact • Version: 16.09.2020 • from application 1.0 • Technical changes and errors excepted.
Page 24
The menu item only appears if a rain blocking was configured for "control". The input object "rain blocking" is linked with the output object of a rain sensor. Radio Actuator KNX RF S1R-B2 compact • Version: 16.09.2020 • from application 1.0 • Technical changes and errors excepted.
Page 25
If limiting the slat angle (shutters only): Limitation type • slat angle Movement allowed in the angle range from (in %) 0...100 to (in %) 0...100 Radio Actuator KNX RF S1R-B2 compact • Version: 16.09.2020 • from application 1.0 • Technical changes and errors excepted.
Assign a scene number to the scene save point. Use this scene number to call/save the movement position stored in the actuator. Make sure that every scene number is used only once per drive channel. Radio Actuator KNX RF S1R-B2 compact • Version: 16.09.2020 • from application 1.0 • Technical changes and errors excepted.
• do not send telegram Command when releasing the button • send 0 • send 1 • do not send telegram Radio Actuator KNX RF S1R-B2 compact • Version: 16.09.2020 • from application 1.0 • Technical changes and errors excepted.
Page 28
If the input to the drive control is used via the bus, select the bus function "shutter", "awning", "blinds" or "window" and specify the button function and control mode. Radio Actuator KNX RF S1R-B2 compact • Version: 16.09.2020 • from application 1.0 • Technical changes and errors excepted.
Page 29
If the input is to be used as an 8bit encoder, select the "8 bit encoder" bus function and specify which value will be sent. Function 8 bit encoder Value 0...255 Radio Actuator KNX RF S1R-B2 compact • Version: 16.09.2020 • from application 1.0 • Technical changes and errors excepted.
Page 30
The input can be blocked using a blocking object. For active blocking there is no bus communication. Use blocking object No • Yes Radio Actuator KNX RF S1R-B2 compact • Version: 16.09.2020 • from application 1.0 • Technical changes and errors excepted.
Page 31
Long holding (release after Time 1+2 runs out): Drive moves independently to the end position. The movement can be interrupted by a short tap. Radio Actuator KNX RF S1R-B2 compact • Version: 16.09.2020 • from application 1.0 • Technical changes and errors excepted.
Time basis 0.1 s • 1 s • 1 min • 1 h Time factor 4...255; 10 Radio Actuator KNX RF S1R-B2 compact • Version: 16.09.2020 • from application 1.0 • Technical changes and errors excepted.
ETS download Response when blocking no change • opened • closed Response upon release follows switch command • opened • closed Radio Actuator KNX RF S1R-B2 compact • Version: 16.09.2020 • from application 1.0 • Technical changes and errors excepted.
(215), the staircase light time function is activated. The time function has priority, i.e. the status triggered by normal switching is overwritten. Radio Actuator KNX RF S1R-B2 compact • Version: 16.09.2020 • from application 1.0 • Technical changes and errors excepted.