Konica Minolta AccurioPress C3080 Quick Manual page 66

6
No. Name
1 Dual Scan Document Feeder
DF-706 (ADF) (Option)
2 Sub power switch
Service port (USB 2.0 Type A e 3)
3
4 Touch Panel
5 Control Panel
6 Toner supply door
7 Toner supply door handle
8 Tray 1
9 Tray 2
10 Main body front door handle
11 Front door
12 Original Cover OC-511 (Original
cover) (Option)
13 Working Table WT-511 (optional)
14 Multi Bypass Tray MB-506 (option-
al)
15 Right side door
16 Waste toner box replacement
door
17 Output Tray OT-511 (optional)
18 Power cord
19 Integrated Color Care Unit Con-
nection Port
20 Video Interface Kit connection
port
21 Service port (USB 3.0/2.0
Type A x 1)
22 Service port (USB 2.0 Type B x 1)
23 Network port (10Base-T,
100Base-TX, 1000Base-T)
24 Dust proof filter
25 Lock release lever
6-6
Name of each Component
Description
Feeds multiple originals on a sheet basis to scan data.
Even a 2-sided original can be scanned by one paper feed
operation without reversing paper.
This device cannot be installed on the Printer model.
Turns machine power on/off when pressed.
Used to connect devices such as an external storage me-
dium (USB flash drive), keyboard, and mouse.
This port is available for low-power devices only. Please
provide an external supply of power for devices that re-
quire a large amount of power.
Displays screens such as the [MACHINE] screen to allow
various settings and machine operations. Also, operation
or troubleshooting procedures can be provided.
Used for various settings and machine operations.
Opens to replace the toner bottle.
Pulled to the right to open the toner supply door.
2
Holds 500 sheets (80 g/m
Holds 1000 sheets (80 g/m
Pulled to the left to open the main body front door.
Opens to allow removal of paper jam or to turn on/off the
main power switch.
Opens to place an original on the Original Glass, then
closes to hold it in position. This device cannot be installed
on the Printer model.
Provides a convenient workspace for documents before
and after copying.
Opens to use copy paper other than that which is loaded
in the machine trays. Up to 250 sheets (80 g/m
Bond) can be loaded.
Opens rightward for removal of paper jam.
Opens to allow replacement of the waste toner box.
Holds sets output in non-offset or offset mode.
Supplies the main body with electric power.
Used to connect Integrated Color Care Unit IQ-501 by ca-
ble.
Used to mount Video Interface Kit VI-509 (optional).
* Video Interface Kit VI-509 (optional) is required to con-
nect Image Controller IC-313, Image Controller IC-314,
or Image Controller IC-417 to this machine by cable.
Used to connect devices such as an external storage me-
dium (USB flash drive, USB-HDD), keyboard and mouse.
This port is available for low-power devices only. Please
provide an external supply of power for devices that re-
quire a large amount of power.
Connect this machine to the computer using a USB cable
in order to use it as a local printer.
Connected with an Ethernet cable to operate the machine,
or to use the machine as a network printer/scanner.
Attached for cooling fan in order to keep out dust.
Pressed to the back to open downward for removal of pa-
per jam.
The lock release lever can be reached from the optional
device in the left side.
AccurioPress C3080/C3080P/C3070, AccurioPrint C3070L
/ 21 lb Bond).
2
/ 21 lb Bond).
2
/ 21 lb
6.2