Flagro FVO-200RC Operating Instructions Manual page 3

This heater is designed and approved for use as a
construction heater under CSA B140.8 Portable Oil
Fired Heaters / CSA B140.02003 Oil Burning Equipment
& UL733 Oil Fired heaters.
We cannot anticipate every use which may be made
of our heaters. CHECK WITH YOU LOCAL FIRE
SAFETY AUTHORITY IF YOU HAVE QUESTIONS
ABOUT APPLICATIONS.
Other standards govern the use of fuel gases and heat
producing products in specific applications. Your local
authority can advise you about these.
Model .................................................................
Input .........................................................
Fuel ...................................................................
Fuel Pressure .......................................................
Nozzle ................................................................
Electrical ............................................................
Ignition ................................................................
.................................................................
Air Circulation .......................................................
Fuel Consumption ...................................................
Approved ............................................................... cETLus listed
SPECIFICATIONS
- 3 -
FVO-200RC
BTUH Range
185,000 Btu
No.1, No. 2,
diesel or
kerosene
180 psi
1.10 x 70A
115V 15 AMP
Direct Spark
Ignition
Thermostat
Control
2600 cfm
1.30 Gal/hr