Mitsubishi Electric AT-50B Instruction Book page 56

Usage - Main Menu Settings
Control Panel (cont'd)
Main Menu > Control Panel
Main Menu > Control Panel > Function Key Setting
2Assigning Collective Operation functions to the Function 1 button
(F1) and Function 2 button (F2)
Touch the 2 Function Key Setting button on the [Control Panel] screen.
1. Touch the check mark [
will appear as [ ].
(Check the check mark in the F1 column to assign a function to F1, and check the check mark in the F2
column to assign a function to F2. Touch the button again so that the button will appear as [
the selection.)
2. Touch the 3 Save button.
• As a default, no functions are assigned to either F1 or F2.
• The F1 and the F2 will be effective only on the HOME screen.
• To use the F1 or F2 button to execute a function, certain settings for Collective Operation must be set.
(Refer to P40 for information about the Collective Operation settings.)
• If " " appears on the checkbox, the function that corresponds to the checkbox is not available and the
function cannot be assigned to the F1 or F2 button.
56
3
] that corresponds to the function to assign to F1 or F2 so that the checkmark
1
2
3
4
] to cancel