Mitsubishi Electric AT-50B Instruction Book page 32

Usage - Main Menu Settings
Operation Setting (cont'd)
3. Select the cell where a specific group and a day (date) intersect to assign a pattern.
* Patterns can be copied, pasted, or deleted on the Group-and-day/date-selection screen.
e.g., The weekly schedule of a specific group can be copied and pasted to another group,
or the schedule pattern of a specific day can be copied and pasted to another day.
Refer to P34 for details.
4. On the Pattern-selection screen, select [--] (deselected) or one of the 12 or 5 patterns (between [P01]
and [P12] on the [Weekly] tab OR between [P01] and [P05] on the [One day] tab). Each pattern can be
newly configured, copied and pasted, or edited. See 1, 2, and 3 below for details.
Touch a schedule pattern to select it.
Black pattern numbers indicate that the patterns have already been configured, and the white ones
indicate blank patterns.
① To configure a new pattern using a blank pattern
Touch a blank pattern number, then touch the
⇒ See Step 5.
If one or more patterns have been configured and saved, the message "When copying other
setting patterns to edit, select the pattern to be copied, and touch the OK button." will appear.
Touch the OK button to create a new pattern using a blank pattern. To use an existing pattern
as a template, select a desired pattern and then touch the OK button.
32
Operation pattern numbers
Scheduled events for the selected pattern
• Appears only if the selected pattern has been configured.
• The functions not supported by the selected group will appear
underlined in red, and they will not be executed.
* Touch the < > buttons to check the actions for each scheduled
event.
* Refer to P36 for icon definitions.
button to access the Edit-Pattern screen.