Mitsubishi Electric AT-50B Instruction Book page 33

② To copy an existing pattern and paste it to selected days or dates
Touch a pattern number to select it, then touch the OK button to return to the Group-and-day/date-
selection screen. To set the schedule for other groups or days/date ⇒ See Step 2.
When setting is complete ⇒ See Step 10.
③ To edit an existing pattern
Touch an existing pattern number, then touch the
⇒ See Step 5.
If the selected pattern number is assigned to other groups or days, the message "This pattern
is used for another schedule. To use different pattern number, select the number, and touch
the OK button." will appear. To change the schedule of the day or date that was selected in
Step 3 above alone, select a new blank pattern number and then touch the OK button. To
change the setting of all groups and days to which the pattern is assigned, just touch the OK
button.
5. On the Edit-Pattern screen, touch an event number to edit its contents.
Event No. Scheduled actions
ON/OFF, Mode, Set Temperature, and Fan Speed
*1 The scheduled actions for each event will be displayed over two pages.
Use the scroll buttons to switch between the pages.
*2 On the Edit-Pattern screen, the events of a specific pattern can be copied and pasted to another
pattern.
Refer to P34 for details
button to access the Edit-Pattern screen.
Event No. Scheduled actions
Air direction, Prohibit Remote Controller Operation
Scroll button
33