To Select The Groups On Which To Execute The Collective Operation - Mitsubishi Electric AT-50B Instruction Book

To select the groups on which to execute the collective operation

(Enable or disable the Setback function)
1. Touch the 2 Setback button on the [Collective
Operation Setting] screen.
2. Read the pop-up message, and touch the OK button
to confirm.
3. Touch the C
lower limits. Press the button labeled
different ranges for different groups. The groups
whose temperature setting is different from the one for
the collective setting will appear underlined
4. Select the groups to include from the group buttons
labeled A . By default, all groups are selected.
5. Touch the B Save button.
• The minimum difference between the upper and lower limits is 4ºC (8ºF).
• The temperature range that can be set depends on the connected units.
• The groups that do not support the Setback function cannot be selected.
• The changes that are made while the Setback function is turned on will not be reflected. To have
the settings reflected, turn off the Setback function and then turn it back on. Refer to P20 for how
to turn on/off the Setback function.
To select the groups on which to execute the collective operation
(Enable or disable scheduled operation)
1. Touch the 3 Schedule button on the [Collective
Operation Setting] screen.
2. Read the pop-up message, and touch the OK button
to confirm.
3. Select the groups to include from the group buttons
labeled A . By default, all groups are selected.
4. Touch the B Save button.
buttons to set the upper and
D to set
C
A
.
Select All button
Selects all groups.
Show Group Name List button
Shows a list of group names in a pop-up window.
A
Select All button
Selects all groups.
D
B
B
41