Table of Contents
Advertisement
FAX SIGNAL
The machine will automatically begin reception if you hear a soft
RX
fax tone after answering a call on the machine's handset or an
extension phone. If you use a computer fax modem to send
documents on the same line, you must turn this function off in
order to prevent the machine from mistakenly attempting to
receive documents from the computer fax modem. Press
(YES) to turn on the the automatic reception function, or
(NO) to turn off the function. If you select NO, you must start
reception manually by pressing
you hear a soft fax tone after answering a call.
Initial setting: YES
CALLER-ID
If you subscribe to a Caller ID service from your phone company,
use this setting to have the ID of the caller appear in the display
each time you receive a call. For more information, see page 41.
Initial setting: NO
AUTO PRINT
Press
OUT
Activity Report once every 30 send/receive operations. (The
report can still be printed manually at any time.) Press
to turn off Auto Print Out.
Initial setting: NO
ECM MODE
Press
noise on the telephone line automatically corrected before print-
out at the receiving end. This is only effective when the other
machine has ECM as well. Press
mode. (When there is considerable noise on the line, you may find
that ECM slows transmission. Turning off ECM mode may
increase transmission speed.)
Initial setting: YES
(YES) to have the machine automatically print an
(YES) to have any distortions in a transmission due to
Option Settings
on the machine each time
(NO) to turn off ECM
(NO)
51
Advertisement
Table of Contents
