Table of Contents
Advertisement
E-mail Settings
Accessing the machine's Web
page
To access the Web page, you will need
to know the machine's host name or IP
address (usually it is most convenient to
use the host name).
To check the machine's host name or IP
address, follow the procedure in
Checking your IP address and the
connection (page 16), or print the
Network Settings List (page 55).
Type in the host name or IP address of
the machine in the Address bar of the
Web browser on your computer.
The Web page menu will appear. Select
E-mail Setup and configure the
settings. For explanations of the
settings, click Help in the Web page
menu.
Note: If the Web page is used while the
machine is in operation (except for voice
calls using the handset), machine
operation may become unstable.
18
Using the machine's operation
panel to configure the settings
Follow the steps below to display the e-
mail settings, and then configure each
setting as explained in the table on the
next page.
FUNCTION
1
Press
, then
[
E-MAIL SETTING] appears
2
Press
, then
until the setting that you wish to
configure appears.
3
Press
. (Note: This step is not
necessary for the "FILE FORMAT"
setting.)
4
Enter the required information for
the setting as explained in the table
on the next page.
5
After configuring the setting, the
next e-mail setting will appear in the
display. You can configure the next
setting, or press
until
.
repeatedly
STOP
to exit.
Advertisement
Table of Contents
