Sharp UX-B800 Operation Manual page 44

Sharp fax machine user manual
Hide thumbs Also See for UX-B800:
Table of Contents

Advertisement

Caller ID (Requires Service)
Note: Some caller ID services may not
provide the name of the caller. In this
case, only the phone number will
appear when you receive a call.
Display messages
One of the following messages will
appear while the machine rings if caller
information is not available.
NO
No caller information was
received. Make sure that
SERVICE
your service has been
activated.
CALLER-ID
Noise on the telephone
line prevented reception of
ERROR
caller information.
OUT OF
The call was made from an
area which does not have
AREA
Caller ID service, or the
service is not compatible
with your service.
PRIVATE
Caller information was not
provided at the caller's
CALL
request.
Caller ID list
The machine keeps a log of the most
recent 30 calls and faxes you have
received (the Caller ID list). You can
view the list and automatically dial a
number from the list.
The list is only available if you have
Caller ID service and have turned on
the Caller ID function.
After you have received 30 calls, each
new call will delete the oldest call.
42
The Caller ID list can also be printed.
See page 55.
1
Press
until [<
CALLS>] appears
2
Press
or
through the list
To exit the list, press
3
To dial a number, display the
number and:
Fax: Load the document and press
. Transmission will begin.
Voice call: Pick up the handset.
Dialling will begin automatically.
Deleting calls from the list
To delete a single call from the list,
display the call and press
To delete all calls from the list, hold
down for 3 seconds while viewing
any number in the list.
Blocking voice calls
If you have turned on Caller ID, the Anti
Junk Fax function will block voice calls
as well as faxes from your specified Anti
Junk Number (see page 43).
REVIEW
.
to scroll
.
STOP
.
.

Advertisement

Table of Contents
loading

Table of Contents