Option Settings
TRANSACTION
LIST
PSEUDO RING
DURATION
FLASH
SELECT
50
This sets the condition for printing transaction reports (see page
56). Press a number key as follows:
(ALWAYS PRINT): Print after every fax transmission,
reception and error.
(ERROR/MEMORY): Print only after an error or memory
operation.
(SEND ONLY): Print after every fax transmission.
(ERROR ONLY): Print only when an error occurs.
(NEVER PRINT): Never print.
Initial setting: ERROR ONLY
This sets the duration of the special ringing sound that alerts you
to voice calls and manually dialled faxes in TEL/FAX reception
mode. Press a number key as follows:
15 seconds
30 seconds
60 seconds
120 seconds
Initial setting: 15 seconds
This setting is used when the machine is connected to a PBX and
the PBX uses the "Flash" method to connect to an outside line.
Press
(SHORT TIME) if your PBX line is a normal line, or
(LONG TIME) if your PBX is a high-speed line.
Note: This setting is normally only used in Germany. In other
countries, you can try changing the setting if you encounter
difficulty with the default setting.