Duty Cycle Monitoring - LOGICDATA SMARTneo Series User Manual

NOTICE
NOTICE
NOTICE
NOTICE

10.7 DUTY CYCLE MONITORING

The duty cycle monitoring causes the motor control to be disabled for a defined period of time when a de-
fined duty cycle is reached.
NOTICE
USER MANUAL SMARTneo // PAGE 28
The function of automatic detection of drive types is available
only for LOGICDATA SLIMdrive drives.
This function is available only for motor group 1.
The automatic detection function of the SLIMdrive drive types
depends on the settings in the software parameters of the
SMARTneo. Please contact LOGICDATA for additional informa-
tion.
If the number or type of connected drives changes, the control
must be reset to the factory settings.
You can find the precise specification of the duty cycle in the
data sheet.