Actuating The Memory Position - LOGICDATA SMARTneo Series User Manual

This function saves a defined table top height (one table top height per memory position button can be sa-
ved). Proceed as follows to save the table top position:
Move the table top to the desired height.
o 7 3
The display shows the table top position (e.g. 73 cm).
Press the memory button.
SAVE
5 -
The display shows S –.
Press the required memory position button, e.g. 2.
2
5 2
The display shows S 2.
o 7 3
The control clicks twice when the saving process is completed.
After about two seconds, the table top position is displayed again.

9.3 ACTUATING THE MEMORY POSITION

You can use this function to adjust a saved table top position. Proceed as follows to adjust a saved table top
position:
NOTICE
Version A (without double-click function)
Press the required memory position button (e.g. 2) and keep it
2
The table top moves until the saved table top position has been reached.
When you release the button before the saved table top position is reached, the table top
stops and the saved table top position is not reached.
The table top has reached the saved table top position. Release the memory position
button now.
o 7 3
The display shows the current (saved) table top position.
USER MANUAL SMARTneo // PAGE 21
Availability of the double-click function depends on the software
configuration of the motor control unit. The double-click func-
tion is available only for SMARTneo-2-YYY-US which is designed
for the american market.