Safety Warnings - Eaton Power Xpert Series Installation And Operation Manual

Chapter 2

Safety Warnings

This manual contains important instructions that should be followed during installation and
maintenance of the UPS and batteries. Read all instructions before operating the equipment and
save this manual for future reference.
The UPS is designed for industrial or computer room applications, and contains safety shields
behind the door and front panels. However, the UPS is a sophisticated power system and should
be handled with appropriate care.
This UPS contains LETHAL VOLTAGES. All repairs and service should be performed by AUTHORIZED
SERVICE PERSONNEL ONLY. There are NO USER SERVICEABLE PARTS inside the UPS.
Cet onduleur peut générer des TENSIONS MORTELLES. L 'installation et l'entretien ne doivent être
effectués que par le PERSONNEL AUTORISÉ. Ne contient AUCUNE PIÈCE REMPLAÇABLE.
The UPS is powered by its own energy source (batteries). The output terminals may carry live
l
voltage even when the UPS is disconnected from an AC source.
To reduce the risk of fire or electric shock, install this UPS in a temperature and humidity
l
controlled, indoor environment, free of conductive contaminants. Ambient temperature must
not exceed 40°C (104°F). Do not operate near water or excessive humidity (95% maximum).
The system is not intended for outdoor use.
l
Batteries can present a risk of electrical shock or burn from high short.circuit current. The
l
following precautions should be observed: 1) Remove watches, rings, or other metal objects; 2)
Use tools with insulated handles; 3) Do not lay tools or metal parts on top of batteries; 4) Wear
rubber gloves and boots.
ELECTRIC ENERGY HAZARD. Do not attempt to alter any UPS or battery wiring or connectors.
l
Attempting to alter wiring can cause injury.
As a result of the connected loads high leakage current is possible. Connection to earth ground
l
is required for safety and proper product operation. Do not check UPS operation by any action
that includes removal of the earth (ground) connection with loads attached.
l
be toxic.
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS
Ensure all power is disconnected before performing installation or service.
Do not open or mutilate batteries. Released electrolyte is harmful to the skin and eyes. It may
® ®
Eaton Power Xpert 9395C UPS Installation and Operation Manual P-164000821—Rev 01 www.eaton.com/powerquality
DANGER
DANGER!
WARNING
2-1