Disable Spi - NetComm NTC-402 Configuration Manual

8 Enter the following details in this page:
I T E M
NAT
Network Monitoring
9 Scroll to the bottom of the Internet Setup tabbed page and click the Save button to apply the changes you
have made.

Disable SPI

10 Open Security >> Firewall and click the Options tab:
11 Enter the following details in this page:
Firewall Options
I T E M
SPI
Allow Ping from WAN Enable so that ping tests can be performed over the
NTC-402 – Telstra Private IP WAN Configuration Guide
CG01068 v. 1.0 October 2018
D E S C R I P T I O N
Disable the NAT (Network Address Translation)
functionality.
Disable the Network Monitoring functionality.
Table 3 – Virtual Server Rule Configuration page
Figure 5 – Basic Networking > WAN & Uplink > Internet Setup tabbed page
D E S C R I P T I O N
Disable the SPI (Stateful Packet Inspection, also known
as stateful firewall) functionality.
wireless IP WAN.
Table 4 – Firewall Options
T E L S T R A S E T T I N G S
 Enable
 Enable
T E L S T R A S E T T I N G S
 Enable
 Enable
© NetComm Wireless 2018
8 of 11