Vitoconnect 100, Type Opto1 - Viessmann VITODENS 200-W Type B2HA Technical Manual

Control units
(cont.)

Vitoconnect 100, type OPTO1

Part no. Z014494
■ Internet interface for remote control of a heating system with
1 heat generator via WLAN with DSL router
■ Compact device for wall mounting
■ For system operation with ViCare app and/or Vitoguide
Functions when operating with the ViCare app
■ Calling up the temperatures of connected heating circuits
■ Intuitive adjustment of desired temperatures and time programs for
central heating and DHW heating
■ Easy transmission of system data, e.g. fault messages via email or
telephone communication with the heating contractor
■ Heating system fault reporting by push notification
The ViCare app supports the following end devices:
■ End devices with Apple iOS operating system
■ End devices with Google Android operating system
Note
■ For compatible versions, see App Store or Google Play
■ For further information, see www.vicare.info. and technical guide
"Connectivity with WLAN and Vitoconnect".
Functions when operating with Vitoguide
■ Monitoring of heating system following enabling of the system by
the system user
■ Access to operating programs, set values and time programs
■ Scanning system information for all connected heating systems
■ Display and forwarding of fault messages in plain text
Vitoguide supports the following end devices:
■ Terminal devices with a screen size of 8 inches or larger
Note
For more information, see www.vitoguide.info.
Standard delivery
■ WLAN module for connection with the DSL router, for wall mount-
ing
■ Connection line with Optolink/USB (WLAN module/boiler control
unit, 3 m long)
■ Power cable with plug-in power supply unit (1 m long)
On-site requirements
■ Compatible heating system with Vitoconnect 100, type OPTO1
Note
For supported control units, see www.viessmann.com/vitocon-
nect
■ Before commissioning, check the system requirements for commu-
nication via local IP networks/WLAN.
■ Internet connection with flat rate data (without time or volume
restrictions)
Appendix
6.1 Regulations / Directives
Regulations and directives
We, Viessmann Werke GmbH & Co. KG, declare that the Vitodens
gas condensing boilers have been tested and approved in accord-
ance with currently applicable directives/regulations, standards and
technical rules.
VITODENS 200-W
Specification
2 0
Specification
Power supply via plug-in
230 V~/5 V
power supply unit
Rated current 1 A
Power consumption 5 W
Protection class II
IP rating IP 30 to EN 60529; ensure through de-
sign/installation.
Permissible ambient temperature
– Operation –5 to +40 °C
Installation in living spaces or installa-
tion rooms (standard ambient condi-
tions)
– Storage and transport –20 to +60 °C
WLAN frequency 2.4 GHz
Observe all engineering standards and statutory requirements appli-
cable to the installation and operation of this system in your country.
Only qualified contractors should carry out the installation, the mains
gas and flue gas connections, commissioning, the electrical connec-
tion as well as general maintenance and repair work.
6
VIESMANN
99