Product Information; Vitodens 100-W, Type B1Hf, B1Kf - Viessmann Vitodens 100-W B1HF Series Installation And Service Instructions Manual

Intended use
(cont.)
Incorrect usage or operation of the appliance (e.g. the
appliance being opened by the system user) is prohibi-
ted and will result in an exclusion of liability. Incorrect
usage also occurs if the components in the heating
system are modified from their intended use (e.g. if the
flue gas and ventilation air paths are sealed).

Product information

Vitodens 100-W, type B1HF, B1KF

Wall mounted gas condensing boiler with Inox-Radial
heat exchanger and the following integrated compo-
nents:
■ Modulating MatriX-Plus burner for natural gas and
LPG
Hydraulics with 3-way diverter valve and variable
■
speed high efficiency circulation pump
Type B1KF: Plate heat exchanger for DHW heating
■
■ Weather-compensated or constant temperature con-
trol unit
■ Integral diaphragm expansion vessel (8 l capacity)
The selected gas category in the delivered condition
and the associated nominal gas pressure are given on
the boiler type plate. The type plate also shows the
other gas types and pressures with which the boiler
can be operated. A conversion within the stated natu-
ral gas groups is not required. For conversion to LPG
(without conversion kit), see "Commissioning, inspec-
tion and maintenance".
Type plate
A
Fig. 1
Type plate with QR code for appliance registration
A
The type plate of the heat generator contains exten-
sive product information and an appliance-specific QR
code with the marking "i" for direct access to prod-
uct-specific information and product registration on the
internet.
The QR code contains the credentials for the registra-
tion and product information portal, and the 16-digit
serial number.
Note
A further label with the QR code is enclosed with the
heat generator.
Stick the label in the installation and service instruc-
tions so it can be easily found again for later use.
The Vitodens 100-W may only be delivered to coun-
tries listed on the type plate. For deliveries to other
countries, approved contractors must arrange individ-
ual approval on their own initiative and in accordance
with the law of the country in question.
Information
9