Condensate Connection - Viessmann VITODENS 200-W Type B2HA Technical Manual

Design information
Note
Secure the flue gas cascade with suitable means.
Suspension from the ceiling is recommended. Observe the max. dis-
tance between fixing points F.
Boiler
a mm
b mm
c mm
d mm
e mm
Note
Height dimension "c" can be reduced by 150 mm in conjunction with
a low loss header and by 300 mm in conjunction with a cascade
module adaptor. In this case, the fixing profiles must be installed
accordingly.

4.2 Condensate connection

Route the condensate pipe with a constant fall.
Route the condensate from the flue system (if equipped with a drain)
together with the boiler condensate directly or (if installed) via a neu-
tralising system (accessories) to the public sewage system.
Vitodens 200-W, 49 and 60 kW
A Drain hose (Vitodens standard delivery)
B Drain outlet kit (accessories)
VITODENS 200-W
(cont.)
(2x2) 49 kW
(2x2) 60 kW
A
B
For details regarding the flue gas cascade, see page 48 and the
technical guide on flue systems. A flue gas back draught safety
device is integrated into each boiler.
For further details regarding the hydraulic cascade, see page 57.
(2x2) 80 kW
(2x2) 99 kW
2111 2136
176 207
1750 1750
1350 1422
680 843
Note
A pipe vent valve must be installed between the trap and the neu-
tralising system.
Vitodens 200-W, 69, 80 and 99 kW
A Drain hose (Vitodens standard delivery)
B Drain outlet kit (accessories)
(2x3) 49 kW (2x3) 80 kW
(2x3) 60 kW (2x3) 99 kW
2141
176
1750
1350
680
A
B
VIESMANN
2166
207
1750
1422
843
4
71