Unpacking; Unpacking Procedure - Canon Paper Folding Unit-J1 Service Manual

Unpacking

Unpacking Procedure

NOTE:
The Equipment is secured by tapes, cushioning and other
materials to protect it from vibration and impact during
transit. Remove all such tapes and cushioning materials
as instructed below before installing this equipment. Keep
all fixings in a safe place for later reuse in reshipping this
equipment, as for relocation and repairs.
1. Take out the accessory box from the cushioning
materials.
CAUTION:
Do not remove 3 cushioning materials because it may
cause to deform this equipment.
2. Lift the equipment together with the pallet.
CAUTION:
• Be sure not to have the equipment itself because
it may cause to deform or damage the equipment.
• This equipment is so heavy (weighing: approx. 71
kg). Be sure to work in a group of 3 persons or
more.
3. Remove the pallet and cushioning materials shown
in the figure. Then, put the plastic cover down.
4. Lift the front and rear side lightly to remove the
cushioning materials and plastic cover.
114
6. Installation