Attaching The Label - Canon Paper Folding Unit-J1 Service Manual

■ Connecting to High Capacity
Stacker
1. Fix the Shunt Cable to the rear bottom of this
equipment and High Capacity Stacker.
• 2 Screws (Binding; M4x10)
NOTE:
When the shunt cable is fixed, do not overlap it on the
bosses of the mount plate.
2x

Attaching the Label

1. Open the front upper cover.
Binding ; M4x10
139
2. While holding the jam handling lever, open the
transfer guide.
3. Pull out the folder unit.
4. Open the folder guide plate (right) fully by two steps.
6. Installation