Removing The C-Fold Stopper Solenoid (Sol5); Removing The Through-Pass Inlet Antistatic Needle - Canon Paper Folding Unit-J1 Service Manual

■ Actions after Replacement the Parts
1. Clear parts counter.
Service Mode > COPIER > COUNTER > DRBL-2 > PF-TR-SL

Removing the C-fold Stopper Solenoid (SOL5)

■ Preparation
1. Open the front cover."Open the Front cover" on page 64
2. Open the feed guide.
3. Draw out the folding unit.
4. Remove the right inner cover.
■ Procedure
1. Release the harness from the wire saddles to remove the C-fold stopper solenoid unit.
• 1 Screws
• 1 Connector
■ Actions after Replacement the Parts
1. Clear parts counter.
Service Mode > COPIER > COUNTER > DRBL-2 > PF-ST-SL

Removing the Through-pass Inlet Antistatic Needle

■ Preparation
1. Open the front cover.
"Open the Feed Guide" on page 65
"Drawing out the Folding Unit" on page 71
"Removing the Right Inner Cover" on page 70
1x
1x
2x
"Open the Front cover" on page 64
77
4. Disassembly/Assembly