Canon Paper Folding Unit-J1 Service Manual page 138

3. Close the 3 Wire Saddle removed in Step 2.
3x
4. Fix the Interface Cable.
• 1 Screw (W-Sems ; M4x12)
1x
W Sems ; M4x12
132
5. Connect Interface Cable connector to the board.
• 1 Connector
• 1 Guide
• 5 Wire Saddles
1x
6. Cut out the face cover of the rear upper cover with
the side cutters.
CAUTION:
Be sure to check that there is no burr.
6. Installation
6x