Unpacking And Checking The Components - Canon Super G3 FAX Board-T1 Installation Procedure

1.1 Unpacking and Checking the Components

1.1.1 Checking the Contents
In addition to this unit, you will need a fax panel unit (Fax Panel-A1) to enable the iR machine's fax functions.
MEMO:
If the machine is already equipped with an optional Inner 2-Way Tray-E1, you may skip the steps given for the
mounting of the full state sensor unit.
[1]
[5]
[13]
[1] Fax Unit
[2] Modem PCB
[3] Full state Sensor Unit
[4] LAN Cover (EUR, AU, KR only)
[5] Telephone Cord
Telephone Cord (EUR only)
[6] NCU-PSU Cable
[7] Modem-NCU Cable
[8] IP-Modem Cable
[9] Modem-NCU Cable
[2]
[6] [7]
[14]
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
4 pc.
1 pc.
1 pc.
1 pc.
1 pc.
[3]
[8] [9]
[15]
F-1-1
[10] Edge Saddle (black)
[11] Wire Saddle (white)
[12] Stamp Ink Cartridge
[13] Screw (M3X8)
[14] Fax Approval Label (EUR only)
A-TICK Label (AU only)
[15] Facsimile Guide (US only)
[16] Facsimile Guide CD-ROM (out side US)
[17] FAX Driver CD-ROM (out side TW)
FAX Driver CD-ROMt (TW only)
2
[10] [11] [12]
[16] [17]
[4]
1 pc.
2 pc.
1 pc.
10 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
2 pc.