Check Items When Turning Off The Main Power; Installation Outline Drawing; Unpacking The Equipment - Canon AD2 Service Manual

5
Installation > Unpacking the Equipment

Check Items when Turning OFF the Main Power

Check that the main power is OFF.
1) Turning off the Main Power Supply Switch of the Host Machine.
2) Check that the display on the Control Panel and the Main Power Supply Lamp are turned
off before disconnecting the outlet.

Installation Outline Drawing

5 Installation > Unpacking the Equipment
F-5-4

Unpacking the Equipment

1) Remove the container box.
CAUTION:
To prevent a fall, be sure not to lift this equipment while it is still in the plastic bag.
2) Open the plastic, remove the 2 pads and a piece of Cardboard by lifting rear of the
equipment, and move the plastic toward the pads at front.
Pad
Plastic
5-3
F-5-5
Pad
Cardboard
F-5-6
5-3