November 1985; Bus Management Functions; Gpib Initialization Functions - National Instruments GPIB-MAC User Manual

November 1985

GPIB Functions
The GPIB functions are divided into subgroups as shown. The
subgroups are listed with the most frequently used groups first.
Often, the I/O and bus management functions are the only ones you
need.
Function
RD count,address
WRT count,address list
Function
CLR address list
LOC address list
TRG address list
Function
CADDR address
EOS modes,eoschar
EOT on/off
RSC on/off
SECTION THREE - PROGRAMMING THE GPIEbMAC
23
I/O FUNCTIONS
MANAGEMENT FUNCTIONS
BUS

GPIB INITIALIZATION FUNCTIONS

Read data
write data
Trigger selected device(s)
Change the GPIB address
of the GPIB-MAC
Change/disable GPIB EOS
termination mode
Enable/disable END
message on GPIBwrites
Place the GPIB-MAC online/
offline
Request or release System
Control
Change or disable time limit