Quick Start; Figure 2-1: Input Switch Wiring - Honeywell XYR 5000 Series User Manual

Honeywell Industrial Wireless
2.

Quick Start

Rev 5
08/06
This section summarizes what must be done in order to get the
device installed, configured, and in operation quickly. However, it
does not provide detailed or how-to information to perform the tasks
outlined.
[1] Install the Transmitter in the desired location of operation.
[2] Wire input switches as shown in the figure below.

Figure 2-1: Input Switch Wiring

[3] Ground Transmitter via grounding screw provided in
enclosure.
[4] Close enclosure and secure enclosure via set screw.
[5] Turn on Transmitter by pressing ENTER and NEXT buttons
simultaneously and holding until unit powers up.
[6] Set RF CHAN setting equal to the Base Radio's RF Channel.
[7] Set BAUD RT setting equal to the Base Radio's Baud Rate.
[8] Set RF ID number to be a unique value between 1 and 100.
[9] Select normal transmission rate.
User Manual
Wireless Dual Discrete Input Transmitter
- 9 -