Introduction; Using This Guide; About The Device - Honeywell XYR 5000 Series User Manual
Wireless dual discrete input transmitter, 900 mhz ism band
Hide thumbs
Also See for XYR 5000 Series:
- User manual (36 pages) ,
- User manual (54 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
Honeywell Industrial Wireless
1.
Introduction
Rev 5
08/06
1.1.
Using This Guide
This guide is designed to assist in installing, operating, and
maintaining Honeywell Model WW591 and WW592 Transmitters.
The Guide is broken into sections as follows:
Section 2: Quick Start
This section summarizes what must be done in order to get the
device installed, configured, and in operation quickly. However, it
does not provide detailed or how-to information to perform the tasks
outlined.
Section 3: Installation
This section explains how to correctly wire the Input Switches and
ground the Transmitter. Also covered in this section are mechanical
installation considerations such as Transmitter placement.
Section 4: General Configuration
In this section general configuration options such as password
protection and selecting a user password are discussed. Also
covered is the setting of a Transmitter tag name, resetting of all
Transmitter settings, and a discussion of the various messages that
are displayed on the Transmitter LCD.
Section 5: Configuring the RF Communications
This
section
covers
Communications
that
communication with the Base Radio. Parameters discussed are the
Transmitter RF ID, the RF channel setting and the Baud Rate.
Section 6: Configuring the Sampling and Transmission Rates
This section explains the amount of time between each sample of
the process and aids you in selecting the time between each
transmission of this sample to the Base Radio. Use of a smart rate
is also discussed.
Section 7: Maintaining the Transmitter
This section explains how the Transmitter should be cared for once
it has been placed into service and how to change the battery.
Section 8: Technical Specifications
This section lists the technical specifications for this device including
power characteristics, accuracy, and operating characteristics.
1.2. About the Device
The Wireless Dual Discrete Input Transmitter is a reliable Radio
Frequency (RF) transceiver coupled with a dual-channel switch
input that can be used to monitor simple apparatuses in hazardous
and hard-to-reach areas.
User Manual
Wireless Dual Discrete Input Transmitter
the
setup
of
the
allow
the
Transmitter
Transmitter
RF
to
achieve
- 6 -
Advertisement
Table of Contents
