Overall Configuration Menu Map; Setting The Transmitter Tag Name; Figure 4-3: Overall Configuration Menu Map - Honeywell XYR 5000 Series User Manual

Honeywell Industrial Wireless
Rev 5
08/06

4.3. Overall Configuration Menu Map

A complete Transmitter Menu Map is shown in Appendix C. Below is
an overall view of the configuration menu to aid the user in setting
up the Transmitter for proper operation.

Figure 4-3: Overall Configuration Menu Map

Note The user must enter a four-digit password to enter the
CONFIG and DIAGNSE menus. The default user password is 0000.
The FACTORY menu is for factory use only. For more information
on the password see Section 4.5.
4.4.

Setting the Transmitter Tag Name

Note
Once WMT has been used to configure the Transmitter, this menu
option will be disabled on the Transmitter LCD menu. See Section 4.1
for more details.
Each Transmitter has a user-settable Transmitter Tag Name. This
Tag Name is displayed upon Transmitter power up, and when the
Read-Only Sequence is selected. The Tag Name is a 21-character
string that is displayed in three separate 7-character flashes on the
Transmitter LCD.
User Manual
Wireless Dual Discrete Input Transmitter
- 26 -